Stayput T-Lock
STAYPUT T-LOCK
The Stayput® T Lock consists of three 100% corrosion free nylon composite components: a Cap, Key, and a low 5mm profile rectangular base with 2 fixing holes to be secured using a 6g countersunk screw. The Cap and Key are installed into the fabric through a SP4 eyelet and are simply pressed or tapped together. Once installed the Cap and Key remain attached to the cover. To secure your cover simply insert the Key into the Base and rotate the Cap ¼ turn clockwise until engaged with the Base. To remove simply turn the Cap ¼ turn counterclockwise.
TO INSTALL: Line up the two ridges along the key shaft with the corresponding slots under the cap and squeeze or tap the parts together until fully engaged.
T- Lock Stayput Flyers Download: https://www.stayputfasteners.com.au/application/files/5916/5509/4759/T_Lock_Stayput_Fasteners_-_Flyer_2022.pdf
T-LOCK CAP |
|||
| Product Code | COLOUR/FINISH | SIZE |
|
| VB-TLC-B | Black | SP4 eyelet | |
| VB-TLC-W | White | SP4 eyelet | |
T-LOCK FLAT BASE |
|||
| Product Code | COLOUR/FINISH | SIZE |
|
| VB-TLFB-B | Black | SP4 eyelet | |
| VB-TLFB-W | White | SP4 eyelet | |
T-LOCK KEY |
|||
| Product Code | COLOUR/FINISH | SIZE |
|
| VB-TLK-B | Black | SP4 eyelet | |
| VB-TLK-W | White | SP4 eyelet | |
